Samsung Galaxy S4 Screen Replacement
Bear in mind before beginning: though replacing the glass on your device is a simple procedure, it’s also very delicate. You might want to use this guide close, while being careful not to further damage the device, and naturally, being especially careful to never cut or burn yourself.Neither I nor Chilliwack iPhone Repairs will be accountable for any damages. Also, this method would likely work towards the other device, but on the lookout for exact instructions for your device exactly is recommend prior to obtaining underway.
How to do it
1. Take the phone apart: back plate, battery, SIM card etc must also be removed, you can use your fingernail or possibly a spudger, whatever works best for you you.
2. Make use of the heat gun or motorized inflator (set to minimum) as well as heat the glass for roughly 3 to 4 minutes, being careful not to overdo it and damage the digitizer below. If you are using a blow dryer, it could take a longer time, because the heat isn’t as intense.
3. The heat dissolves the adhesive which holds the glass utilizing the device.
4. Once it’s been loosened enough, go get a nail file or possibly a thin plastic tool to carefully lift the glass around the edges starting from the very best and operating from the way around.
5. Based on how damaged your S4 glass is, you may need to cover it with the use of a few layers of mp3 to avoid the glass fragments from jumping everywhere. This would even be a good opportunity to wear safety goggles.
6. For anybody who is finding that cup will still be sticking, it’s possible to reheat it, but always with all precautions taking not to ever overheat.
7. Remove the two touch keys before lifting off the glass.
8. Lift the old glass, but slowly and carefully.
9. Go get a plastic razor to eradicate the remainder of the display that are caused by the digitizer. Also take some care the area around the touch keys.
10. After you take off old glass, clean the digitizer by using a microfiber cloth and get in touch with cleaner to eradicate adhesive residue. In case you happen to have scratched the digitizer, this shouldn’t become a problem simply because it won’t be visible when the screen is later excited.
11. Locate the adhesive film that was included with the glass replacement along the edges of the device. You are also able to purchase 3M 2mm strips when it didn’t bring it.
12. Take the glass replacement and get rid of the underside plastic covering, but you go out the one number one on. Make certain you don’t touch the bottom side, or get any dust for it. Say you do, clean it having the microfiber cloth.
13. Locate the glass on the phone and remove the top layer of protective plastic.
14. Now, you can place your phone together again again: insert the SIM, microSD and battery, and add the spine piece on again.
Your Galaxy S4 is as like as if it is new!
Samsung Galaxy S4 Screen Replacement
